HD 10DA

AJA HD10DA 1x6 HD/SD-SDI Re-Clocking Distribution Amp with DWP

PRODUCT HIGHLIGHTS

1x Auto-Sensing Input
6x Separately Buffered Outputs
Re-Clocking & Equalization
Universal Power Supply Included

The AJA HD10DA 1x6 HD/SD-SDI Re-Clocking Distribution Amp with DWP features an auto-sensing input and six separately buffered outputs with cable equalization and re-clocking (up to 410 ft in HD and 984 ft in SD by coax cable). Both input and outputs support embedded audio. A universal power supply comes included.

 

Key Features
Passes all ancillary data
Bi-color LED light indicates lock to HD or SD

Input    1x auto-sensing HD/SD-SDI (SMPTE 259/292/296)

Formats: 
1.5 Gbps, 360 / 270 / 177 / 143 Mbps
Outputs    6x equalizing and re-clocking HD/SD-SDI 

Equalization: 
HD: 410 ft (125 m) 
SD: 984 ft (300 m)
Power    +5 - 18 V DC, Regulated, 2.5 W
Dimensions    5.8 x 3.1 x 1" (14.7 x 7.9 x 2.5 cm)

HD10MD3

AJA HD10MD3 HD to SD-SDI & Analog Downconverter

PRODUCT HIGHLIGHTS

Converts HD-SDI to SD-SDI and Analog
SDI Output Supports 4-Ch Embedded Audio
10-Bit Data Path
Multi-Point Interpolation
Converts 1080p24 / 1080p24sf to 59.94 Hz
Formats Output for 4:3 or 16:9 Monitors
Conversion by External Dipswitch

AJA's HD10MD3 HD to SD-SDI & Analog Downconverter is a miniature solution for converting HD-SDI video to SD-SDI and to component and composite video, using a full 10-bit data path and multi-point interpolation to produce broadcast quality downconverted video. The SDI output supports 4-channel embedded audio from the HD-SDI input. The device also converts 1080p24 or 1080p24sf to 59.94 Hz output video using the standard 3:2 pulldown technique. The output can be formatted for either 4:3 or 16:9 SD monitors. All conversion is done by external dipswitch selection.
Converts HD-SDI to SD-SDI and to component and composite video
SDI output supports 4-channel embedded audio from the HD-SDI input
Uses a full 10-bit data path and multi-point interpolation
Also converts 1080p24 or 1080p24sf to 59.94 Hz by 3:2 pulldown technique
Formats output for 4:3 or 16:9 SD monitors
External dipswitch selection

Formats    1080i 50/59.94/60 Hz 
1080p/psf 23.98/24/25/29.97/30 Hz 
720p 50/59.94/60 Hz
Inputs    1x HD-SDI/SDI dual-rate, SMPTE 292/296
Outputs    1x SD-SDI, SMPTE, 259M 
2x HD-SDI 1x YPbPr on BNC (SMPTE, EBU-N10, Betacam) 
1x RGB on BNC 
1x YC (S-Video) on BNC 
NTSC, PAL


Downconversion    Multi-point interpolation, 10-bit processing 
3:2 conversion for 23.98/24p/psf inputs
User Controls    External dipswitch 
Input video format 
Output video format 
4:3 Safe-zone graticule overlay 
Pedestal output
4:3 / 16:9 Monitor select
Power    +5-18 V DC, regulated, 4 watts 

Included power supply: 
100-240v, 50/60Hz universal input 
+5V DC regulated output 
7.5 watt capacity
Dimensions    5.8 x 3.1 x 1" (14.7 x 8 x 2.5 cm)

V2DIGITAL

AJA V2Digital Analog to HD/SD-SDI Mini-Converter

PRODUCT HIGHLIGHTS

10-bit Analog to Digital Conversion
YPbPr/RGB Component or Composite Input
HD/SD-SDI Output
Full 10-bit Data Path, 2x Oversampling
YPbPr, Betacam, or RGB Component Formats
NTSC or PAL Composite Formats
Control via MiniConfig Software over USB
Low Power, Compact Size
AGC Mode & Color Bar Generator
Universal 5 VDC Power Supply Included

The V2Digital Component/Composite Analog to HD/SD-SDI Mini-Converter from AJA provides a 10-bit conversion of component or composite analog video to SDI at either SD or HD resolutions. It utilizes a full 10-bit data path and 2x oversampling to ensure a high-quality conversion. Its low power consumption and a compact size, makes it suitable for use on set or in AV installations that integrate different signal types.
The V2Digital supports NTSC, PAL, 720p at 50/59.94/60 Hz, 1080i at 50/59.94/60 Hz, and 1080psf at 23.98/24/25 Hz. The converter accepts YPbPr (SMPTE, EBU-N10), Betacam, or RGB component inputs, and NTSC/PAL or S-Video composite inputs. A 4-line Adaptive Comb Filter provides high-quality decoding of composite sources. The comb filter can be switched to 2-line or notch modes for minimum delay requirements.
Configure the V2Digtal using AJA's free MiniConfig software for Mac or PC over the USB 2.0 connection. The software provides an easy-to-use graphical interface with detailed information about input and output formats as well as all configuration parameters. Additionally, external DIP switches on the device let you configure the V2Digital without computer access. A universal 5 VDC power supply comes included.

AGC Mode
Color Bar Generator
Uses 5-20 VDC power


Formats    1080psf 23.98/24/25 Hz
1080i 50/59.94/60 Hz
720p 50/59.94/60 Hz
525i/625i 50/59.94/60 Hz


Inputs BNC:
HD component YPbPr, RGB (SMPTE-274)
SD component (Betacam, EBU-N10), composite, YC (S-Video)
Output

1 x BNC, HD/SD-SDI (SMPTE-259/292/296M)
1 x USB 2.0 (for connection to Mac or PC)
Dip Switches    Control (Local/Remote)
Component/Composite (SD oOnly)
Format (YPbPr/YC or RGB)
Pedestal Present (on/off) (SD only)
Power    5 to 20 VDC, 3 watts
Dimensions    5.1 x 2.4 x 1.0" (13.0 x 6.1 x 2.5 cm)
Weight    Not specified by manufacturer

D10AD

AJA D10AD Component or Composite Analog to SDI 10-Bit Converter

PRODUCT HIGHLIGHTS

Dipswitch-Configurable Input Connectors
Inputs YPbPr, Betacam, or RGB Component
Inputs NTSC/PAL or Y/C Composite
4 Separately Buffered SDI Outputs w/ EDH
Adjustable 4-Line Adaptive Comb Filter
Color Bar Generator
Universal Power Supply Included

The AJA D10AD Component or Composite Analog to SDI 10-Bit Converter features three BNC input connectors that via an 8-switch dipswitch are configurable to input either Component or Composite signals. The converter converts either of these to four separately buffered SD-SDI outputs. The outputs feature EDH protocol (Error Detection and Handling), which confirms whether every field of video is received correctly.
The converter inputs YPbPr, Betacam, or RGB Component, and NTSC/PAL or Y/C Composite. A 4-Line Adaptive Comb Filter provides high-quality decoding for Composite signals. The filter is switchable to 2-line or notch modes for minimum delays. NTSC or PAL is automatically detected.
Please note: The converter requires a Time Base Correct source. Operation is not recommended from VTRs, laser disks, etc., without Time Base Correction (TBC).

Key Features
10-bit universal A/D conversion
Inputs are selectable via an 8-switch dipswitch
Inputs YPbPr, Betacam, or RGB Component / NTSC/PAL or Y/C Composite
4 SDI outputs with EDH
4-Line Adaptive Comb Filter for Composite signals
Full 10-bit data path, 2x oversampling
Color Bar Generator
User Controls
Selectable by a dipswitch, which is accessible through a cut-out on the bottom of the converter: 
Input Video Format
Pedestal Present / Not Present
Narrow / Wide Blanking
AGC On/Off
EDH On/Off
Test Pattern

Inputs    3x BNCs configurable by dipswitch to be Component or Composite: 
YPbPr (SMPTE, EBU-N10), Betacam, or RGB Component 
NTSC/PAL or Y/C Composite
Outputs    4x separately buffered SD-SDI (SMPTE 259M) with EDH
Frequency Response    Y +/-0.15db to 5.5 MHz 
C +/-0.15db to 2.5 MHz
2T K Factor    Less than .5%
Differential Gain    < 1%
Differential Phase    < 1°
A/D Converters    10 bits, 2x oversampling
Power    5 V DC regulated, 4 W
Dimensions    5.8 x 3.1 x 1" (14.7 x 7.9 x 2.5 cm)